Carbon Steel M Profile Press Fittings(DVGW)

Carbon Steel Press fittings pipeline system is widely used in hot water supply, fire protection.

Compared with traditional pipeline system, it`s not only more economical, safer and healthier, 

but also easier and faster for installation with longer service life.

1. Carbon Steel Press fittings range:

Coupling -- Equal coupling, Reducing coupling, Slip coupling, coupling with male/ female threads;

Elbow -- Equal elbow, Elbow 90°, Elbow 45°, Reducing elbow, Elbow with plain end, Elbow with wall plate, and Elbow with male/ female threads;

Tee -- Equal tee, Reducing tee, Tee with wall plate, and Tee with male/ female threads;

Others-- Pipe cap, Pipe Bridge and Flange connector.

2.  Material: Galvanized carbon steel, 1.0034C-Stahl,Kohlenstoffstahl, ACCIAIO AL CARBONIO.

3.  Size: 3/8``-4``inch or as request,  pipe wall thickness: 1.0--2.0mm

Sizes range:

DVGW W534:1995: 15, 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108mm.

JIS G 3448-1980: 15.88, 22.22, 28.58, 34.00, 42.7, 48.6, 76.1, 88.9, 108mm.

4.  Standard:

Press fitting standard:  (DIN) DVGW W534-1995;   (JIS) JWWA G116:2001; GB/T 19228.1-2003

Pipe standard: DIN10312:2003; GB/T 19228.2-2003

O-ring sealing standard: CEN EN 681-1:2006; GBT 19228.3-2003

5.  O-Ring Seal: "Chlorinated butyl rubber" (CIIR), EPDM, HNBR, NBR and FKM, etc.

 EPDM (black): max working pressure 16bar, working temperature from -20℃ to 120℃,  Suit medium: cold and hot water, compressed Air etc. 

6.  Galvanization: all carbon steel pipe fittings are plated with rust-resistant zinc.

7.  Anneal: all stainless steel pipe fittings are annealed in inert gases before packing.

Installation and Connection Order

Equipments And Quality Control

                                                                 Orderly Workshop                     

                                                         Efficient Anneal Equipment

                                                               Pressure Testing                           

                                                                    Tensile Testing